MOOG Mother 32 - SUPER AKCIJA!

8372.00kn 4990.00kn

Informacije o proizvodu

 

NA LAGERU U ZG!

ISKORISTITE LUDU AKCIJU i UŠTEDITE 3385 KN!, CIJENA NIŽA NEGO NA THOMANN A DOBIJAŠ GARANCIJU U HR NA 2 GOD!

Najnoviji i PRVI! tabletop semi-modular synthesizer iz MOOG!

The Moog Mother-32 is the first tabletop semi-modular synthesizer from Moog. It is a distinctive analog instrument that adds raw analog sound, sequencing and extensive interconnectivity to any electronic or modular ecosystem. This expansive new live performance and production instrument has been meticulously designed to provide musicians with a diverse array of creative tools to inspire new music, unique sound and endless sonic exploration.

Mother-32 comes secured in a rugged extruded aluminum enclosure with wood sides and features a voltage controlled 32-step sequencer with 64 sequence locations, definitive Moog low pass and high pass Ladder Filter, 2 voltage controlled mixers, a classic Moog oscillator with dual outputs, wide-range LFO with audio-rate modulation capability, MIDI input and MIDI to CV conversion, white noise, a modular patchbay with 32 patch-points for extended synthesis complexity and an assignable CV jack with 16 assignable sources.

BULLET POINTS
• Semi-Modular design requires no patching for swift, inspired music
creation
• Voltage Controlled 32 Step Sequencer with 64 Sequence Locations
• Low Pass & High Pass Moog Ladder Filter (20Hz–20KHz) with
voltage controlled resonance
• External audio input for processing outside sound sources
• Definitive Moog oscillator with Pulse and Sawtooth wave outputs
• 5-pin MIDI input and MIDI to CV converter
• 32 Modular Patch Points (Includes 5 patch cables)
• 2 Voltage controlled mixers
• Superb companion to Werkstatt 01, Minitaur and other synthesizers
• Main module can be easily transferred into a Eurorack skiff or case
• Mount 2 or 3 units vertically with optional 2 and 3 Tier kits
• Complete solution for new Eurorack users – no other items required
PRODUCT DETAILS
VOLTAGE CONTROLLED OSCILLATOR
• Single VCO with simultaneous Sawtooth and Pulse wave Outputs (+/-
5V)
• 1 V/Octave from 8Hz to 8KHz (16KHz max with LFO/CV)
• Panel Frequency control (+/-1 Octave)
• Toggle Selector for waveform routed to the mixer
• Pulse Width control
• Linear FM and 1V/Octave Exponential FM inputs (+/-5V)
NOISE
• Output normalled to Ext Audio input
• White Noise output (+/-5V)
VOLTAGE CONTROLLED MIXER
• Crossfades between selected VCO waveform and Ext Audio input
(normalled to White Noise)
• Mix CV input (+/-5V)
VOLTAGE CONTROLLED FILTER
• 20Hz to 20KHz switchable Low Pass/High Pass 4-pole Transistor
Ladder Filter with voltage controlled Resonance
• VCF Cutoff input (+/-5V)
• VCF Resonance input (+/-5V)
• VCF Output (+/-5V)
VOLTAGE CONTROLLED AMPLIFIER
• Selectable CV Source: EG or ON (drone)
• VCA CV input (0 to +8V in EG mode and +/-5V in ON mode,
summed with signals from ON/EG switch)
• Output Volume Control (VCA Out and Line/Headphone Out)
• VCA output (+/-5V) and rear panel 1/4" Headphone/Audio Output
(+/-1.7V peak)
LOW FREQUENCY OSCILLATOR
• Square wave output (+/-5V)
• Triangle wave output (+/-5V)
• Selectable waveshape to VCO and VCF MOD sections
• Panel Rate control .1Hz to 350Hz (600Hz max)
• LFO Rate CV input (+/-5V)
ENVELOPE GENERATOR
• Variable controls for Attack and Decay
• Sustain ON/OFF for single-trigger (ASD) or multi-trigger (AD)
behavior
• External Gate input (0 to +5V; Tolerant of 10V gates)
• EG output (0 to +7.5V)
VCO MODULATION
• Selectable Source: EG/VCO MOD or LFO (EG normalled to VCO
MOD in)
• VCO Mod input (normalled to EG/VCO MOD switch position)
• Variable Modulation Amount control
• Selectable Modulation Destination: VCO Pitch or PWM (PWM
summed with Pulse Width panel control)
VCF MODULATION
• Selectable Source: EG or LFO
• Variable Modulation Amount control
• Selectable VCF Modulation Polarity (+/-)
VOLTAGE CONTROLLED MIXER/ATTENUATOR
• Voltage controlled crossfade/mix circuit for mixing two DC coupled
signals
• Mix 1 Input (Normalled to ground)
• Mix 2 Input (Normalled to +5V)
• Mix Control CV input (-5V to +5V)
• Mix Output: Un-inverted output (-5 to +5V)
MULTIPLE
• 1x input 2x output signal multiplier
• Mult Input: Buffered signal
• Mult Outputs: 1 and 2
KEYBOARD
• Single octave 13-note keyboard (In Step Edit Mode this is used to
select, mute and enable sequencer steps.)
• Octave Up/Down buttons select from 8 available octave settings
• Glide Time control
• KB CV output (-5 to +5V)
• Gate Output (0 to +5V)
SEQUENCER
• Dual-mode 32 step sequencer with 64 sequence locations
• Performance Modes:
- In KB Mode, the Keyboard is used to play the instrument, enter
sequence data and transpose sequences.
- In Step Mode, the keyboard functions as the step sequencer
interface and is used to enable and mute steps, update note data
and select sequence banks.
• Each sequence step includes: Note Value, Gate Length (Tie), Rest
On/Off, Accent On/Off, Glide On/Off and Ratchet count (up to 4
note-repeats occurring in the duration of a single note)
• Sequencer Panel Controls: Tempo, Swing, Run/Stop, Hold, and Reset
• Sequencer Control Inputs: Tempo, Run/Stop (also used for sync),
Reset and Hold
• Sequencer Control Outputs: KB, Gate, Accent Pulse
PATCHBAY
• The patchbay contains 32 patch points (3.5mm)
• Available Inputs: External Audio, Mix CV, VCA CV, VCF Cutoff,
VCF Resonance, VCO 1V/Octave, VCO Linear FM, VCO
Modulation, LFO Rate, Mix 1, Mix 2, VC Mix Control, Mult, Gate,
Tempo, Run/Stop, Reset and Hold
• Available Outputs: VCA, Noise, VCF, VCO Saw, VCO Pulse, LFO
Triangle, LFO Square, VC Mix, Mult 1, Mult 2, Assign, EG, KB,
Gate
ASSIGNABLE OUTPUT
• Multipurpose control output for selecting from 16 available functions:
Sequencer Accent, Sequencer Clock, Sequencer Clock /2 Sequencer
Clock /4, Decimated "Ramp”, Decimated "Saw”, Decimated
"Triangle”, Stepped Random, STEP 1, MIDI Note On Velocity, MIDI
Channel Aftertouch, MIDI Pitch Bend, MIDI CC1 Mod Wheel, MIDI
CC2, MIDI CC4 and MIDI CC7
SPECS
• Dimensions: 12.57“W x 4.21“H (with knobs) x 5.24“D
• Weight: 3.5 lbs.
• Power Consumption: 2.8W
• Included Power Supply: 100-250VAC, 50-60Hz, +12VDC 1A
• Patchbay: 32x 3.5mm jacks
• Rear Panel Audio Out: ¼” Headphone / Audio
EURORACK SPECS
• Current Draw: 230mA (10-pin header)
• Mounting Dims: 60HP (.69” 26mm Module Depth)
ACCESSORIES
2 Tier Rack Kit
Mount 2 Mother-32 synthesizers together vertically for increased modularity
and synthesis capabilities.
• P/N: KIT-RM-0201

Uz Mother 32 ne dolaze kablovi niti case, to se posebno narucuje. Imate ove opcije, u sve cijene vec uracunat popust od 20%:

Mother 6" Cables = 145 kn + PDV

Mother 12" Cables = 145 kn + PDV

Postoje i casevi:

17" Case (104 HP) = 980 kn + PDV

12" Case (60 HP) = 890 kn + PDV

Mother Gig Bag = 550 kn + PDV

Product Code: KN6I957